There are 3 test possibilities in the Nitro Toolbox device.
The device is controlled from the application on the computer via USB cable.
* Voltage Regulator Test
* Magnetic Sensor Test
* Can Bus Analyzer
1) CONJECTOR TEST
Our device carries out the connector tests of all passenger cars. It provides the connector test by making a voltage change between 12V - 15V.
Supported connector types;
* LIN BUS
* RLO
* SIG
* C (Japan)
* C (Korea)
* RVC
* P-D
* LD
Connection to the connector is made via RS-232 Port. Connection diagram is attached.
2) MAGNETIC SENSOR TEST
You can perform all tests of both inductive and hall sensors on our device.
If you touch the sensor to a magnetic place through the buzzer, the buzzer will alarm and then silence.
3) CAN BUS ANALYZER
You can watch and stop completely real-time data on our device.
In addition, you have the opportunity to record and examine all data seen on the application screen on the desktop.
With the filtering feature, you have the opportunity to display only the data you want to view.
You can send commands to the opposite device at any time interval and as often as you want on the device.
Supported Baudrate values;
* 10 Kbit
* 20 Kbit
* 33 Kbit
* 47 Kbit
* 50 Kbit
* 83 Kbit
* 95 Kbit
* 100 Kbit
* 250 Kbit
* 500 Kbit
Onur Mahallesi Turhan Cemal Beriker Bulvarı Kiza İş Merkezi A2 Blok Zemin kat No: 437/3 D:1
