Launch CNC603A injector tester is an injector cleaning and injector testing device that can perform cleaning operations of gasoline vehicle injectors both on the vehicle and on the device, as well as testing the injectors by attaching them to the simulation tubes. CNC603A injector tester can perform testing on 6 injectors of the vehicle at the same time. It allows you to clean the injectors in detail with the ultrasonic cleaning cup. CNC-603A provides professional injector cleaning to workshops. Thanks to its small size, it can be operated anywhere. Test: Injector leak test can be performed by simulating different conditions, injectors can be tested by spraying one by one or 6 injectors at the same time. Injector cleaning with correct spraying: The carbon residues in the injector can be cleaned. Injector cleaning with reverse spraying: With this method, the dirt on the filter can be cleaned. Ultrasonic Cleaning: All injectors can be cleaned at the same time in the ultrasonic cleaning chamber. Cleaning on the vehicle – carbon cleaning: The residues in the cylinder can be cleaned and thrown out of the combustion chamber. Properties: * Cleaning and testing single and multi-port injectors * Easy to use thanks to its digital display * Advanced ultrasonic cleaning system * Cycle and pressure simulation * Cleaning 6 injectors at the same time TECHNICIAL SPECIFICATIONS Power supply: AC220 V ± 10% 50 Hz / 60 Hz, AC110 V ± 10% 50 Hz / 60 Hz Input power: 300W Cleaning power: 100 W Speed range: 10 ~ 9990 rpm, step length: 10 rpm Time range: 1 ~ 9999rpm Pulse width range: 0.5 – 25 ms, step length: 0.1 ms Fuel tank range: 2000 ml Ambient Temperature: 0 ˚C ~ +45 °C Relative Humidity: <85% External Magnetic Field Strength: <400 A/m Dimension: 355 × 350 × 356 mm (L × W × H) Weight: 10.5 kg
Onur Mahallesi Turhan Cemal Beriker Bulvarı Kiza İş Merkezi A2 Blok Zemin kat No: 437/3 D:1