The NAVIGATOR TXB Evolution diagnostic tool is TEXA's new interface designed and developed specifically for Motorcycle and MARINE diagnostics. Its hardware features make it compatible with all available protocols for both vehicle groups, and the integrated 16-pin TBM connector allows all diagnostic cables to be used. Supported CAN standards include CAN single-cable management and an additional CAN controller for multi-network diagnostics. Parameter recording in motion NAVIGATOR TXB Evolution allows you to record the diagnostic session in “Dynamic Tests” mode, meaning you can record while the vehicle or boat is moving and evaluate these recordings later. IDC5 is the diagnostic software designed by TEXA to manage all diagnostic operations performed in a workshop. Designed for motorcycle and MARINE vehicles, which TEXA is the leader of, this system is designed for repair technicians, error reading and display of engineering parameters and control unit, activations, settings and configurations of parts mounted on the vehicle, deactivation of warning lamps, configuration of control units, fuel It allows you to perform operations such as trim and injection timing, key programming. More comprehensive troubleshooting The IDC5 software offers you highly specific and useful functions such as Global Scan, Freeze Frame feature for scanning the vehicle detecting the control units and possible faults in the vehicle or for various parameters and data showing the conditions of use. TECHNICIAL SPECIFICATIONS Processor: CORTEX M3 STM32F103ZG 72 MHz, FLASH 1024 KBytes, SRAM 96 KBytes SRAM memory: 16 MBit organized at 1024K x 16 bits NAND Flash memory: 8 GBit into an 8-bit bus Vehicle battery: 12VDC and 24VDC system management External power supply: 8 ÷ 32 V USB communication: Virtual RS232 over USB 2.0 Device Wireless connection: Bluetooth class1 (30 m) Electronic switch: 2-way, 13 independent positions Diagnostic connector: 16-pin TBM
Supported protocols: • Blink codes • K, L (with surge protection 100 mA), ISO9141-2, ISO14230 • ISO11898-2 High Speed CAN • Second ISO11898-2 CAN Channel • CAN ISO 11898-3 Low Speed • CLOCK J2411 Single Wire • SAE J1850 PWM • SAE J1850 VPW • SAE J1708 • RS232 Visible alerts: 1 green/red LED, 1 blue LED 12 V consumption: <200 mA 24 V consumption: <100 mA Operating temperature: 0 ÷ 50 °C Storage temperature: – 20 ÷ 60 ° C Operating humidity: 10~80% without condensation Regulations: • Directive: 1999/5 / EC • Safety: EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + AC: 2011 + A2: 2013 • Electromagnetic compatibility: EN 55022, EN 55024, EN 301 489-1 • Radio systems: EN 301 489-17, EN 300 328-2 Weight: 215g
Onur Mahallesi Turhan Cemal Beriker Bulvarı Kiza İş Merkezi A2 Blok Zemin kat No: 437/3 D:1